May Equipment & Classic Car Auction – Rare 2023 Ford F-450 Limited 12K Miles, Takeuchi Track Loader, 1967 Ford LTD, Dodge Charger SRT8, Mini Excavators, Skid Steers & Attachments, Dump Truck, Semi Tractor & More

Please ensure your phone number and email address are up to date and correct in your profile settings. There will be a 10% Buyers Premium added to each final bid to determine the final sales price. All items must be paid for in full at the end of the auction or at pick up. You will receive an email with a copy of your invoice on May 28th. Forms of accepted payment are cash, check, or major credit card. There will be a 3.5% convenience fee for credit card payments. A 6% sales tax will be added to the items accordingly, or please provide us with a resale tax exempt number and form if you are buying for resale. ALL ITEMS ARE SOLD AS-IS. All property is sold in “AS IS” and “WHERE IS” condition. ALL SALES ARE FINAL! Bidder understands and agrees that no refunds, exchanges, adjustments, chargebacks, etc, will be allowed. Property is available for inspection at specified times and it is the bidder's responsibility to determine the condition. Bidder's failure to inspect any item or lot will not constitute grounds for any claim, refund, adjustment, chargeback, etc. Public Viewing: Saturday, May 23rd 9:00 - 5:00 PM 8963 Bellwood Rd. Bardstown, Ky. 40004 **Location Notice: In the past, we have had GPS sending bidders to the wrong location when entering our address in - 8963 Bellwood Road, Bardstown, Ky 40004. Please note that we are located near Boston, Kentucky. This is NOT the location near Bloomfield, KY—please verify directions before travel. All description information has been gathered from sources which we believe to be reliable but is not guaranteed. Lawson Co. LLC makes no warranty or guarantee of any kind with respect to condition, authenticity, provenance, source, condition, suitability for a particular purpose, etc. Lawson Co. Auctioneers LLC reserves the right to change, modify, delete any item or lot or description in the auction as may be necessary. Buyer is encouraged to view the items prior to bidding.  IMPORTANT! Auction Closing & Bidding Lawson Co. auctions are timed events and all bidding closes at the specified time. Our auctions use an auto-extend feature: if a bid is placed near a lot's scheduled close, the close time automatically extends so other bidders have a fair chance to respond. Auto-extend stays active until no further bids are received within the current extension window. Please monitor the countdown timer to see when a lot will close. Extension times may be adjusted at the auctioneer's discretion. Items are sold in groups of like-kind or similarly priced lots. All items within a group close at the same time. Each lot on the bidding page shows a link symbol indicating which group it belongs to. This lets you watch and bid on multiple items in a group without missing your chance to bid. If any one item in a group receives a bid, every item in that group extends. Extension times shorten as the closing process continues: First 30 minutes: 5-minute extension Next 30 minutes: 3-minute extension Next 30 minutes: 2-minute extension After that: 1-minute extension, and it stays at 1 minute until all items close   Pickup/Payment Info: Two pickup days: May 29th and May 30th 9:00 AM - 6:00 PM. Accepted methods of payment are cash, cashier's check or personal/business check, credit/debit card (with a 3.5% processing fee). Credit and debit card payments are accepted up to a maximum of $2,500 per invoice. Any balance exceeding $2,500 must be paid by an approved alternative payment method, including cash, check, cashier’s check, wire transfer, or other form acceptable to the auction company. The auction company reserves the right to require payment by certified funds at its sole discretion.  **Location Notice: In the past, we have had GPS sending bidders to the wrong location when entering our address in - 8963 Bellwood Road, Bardstown, Ky 40004. Please note that we are located near Boston, Kentucky. This is NOT the location near Bloomfield, KY—please verify directions before travel.  There is a $50 transfer fee on all Titles. Pickup for all Titled Vehicles will be Monday, June 1. from 9:00 AM - 4:00 PM.  Pick up for shipping containers:  Please make arrangements with the auctioneer. Item 28 is located at a secondary location 15 minutes away from the yard. Cannot be picked up before June 1. Please make arrangements with the auctioneer. Item 80 cannot be picked up before June 1. Buyer must be able to load themselves. Please make arrangements with the auctioneer. All purchases that have not been paid for or payment/pickup arrangements are not made by 05/30/2026 your account will be automatically charged to the credit card used at registration, with a 3.5% processing fee. All purchased items must be removed by the deadline of 05/30/2026 unless arrangements have been made. Any items not removed by the deadline will, at the Auctioneer's discretion, be discarded or resold with proceeds retained by Auctioneer. There will be NO REFUND to the purchaser for these forfeited items. All buyers are required to schedule a designated pickup time slot in advance to help ensure an efficient loading process and minimize wait times. Buyers who arrive without an appointment may experience delays or be asked to return at another time. To schedule an appointment: In the upper right-hand corner of the invoice, next to the print & pay buttons, there will be a button that says, “Schedule your pickup appointment”. Once you click that button and you will be able to select from available appointments. Buyers are responsible for bringing their own appropriate vehicles, trailers, tie-downs, straps, and any necessary equipment to safely transport their purchases. While staff will be available to assist with loading, buyers must be physically able and prepared to help move, lift, and secure their items. Buyers should also bring additional help if needed. All items become the buyer’s responsibility once they are removed from the premises. Equipment with Gas Engines (Mini Excavators, Skid Steers, etc.): Buyer must change all engine and hydraulic oil prior to use. Buyer is also responsible for inspecting unit and ensuring all bolts are tightened and secure. Golf Carts: Assembly shown is for advertising purposes only. Buyer must verify proper assembly and safe operating condition. SERVER & SOFTWARE TECHNICAL ISSUES: In the event, there are technical difficulties related to the server, software or any other online auction-related technologies, Lawson Co. Auctioneers LLC reserves the right to extend bidding, continue the bidding, or close the bidding. NEITHER THE COMPANY PROVIDING THE SOFTWARE nor Lawson Co. Auctioneers, LLC SHALL BE HELD RESPONSIBLE FOR A MISSED BID OR THE FAILURE OF THE SOFTWARE TO FUNCTION PROPERLY FOR ANY REASON. Email notifications will be sent to registered bidders with updated information as deemed necessary by Lawson Co. Auctioneers, LLC. Any dispute between Lawson Co. Auctioneers, LLC, its Agents or Representatives and the Buyer(s) will be tried in a court of jurisdiction in Nelson County, Kentucky. By bidding on the property, buyer agrees to all terms and conditions set forth. Agency: Lawson Co. Auctioneers, LLC Agents and Representatives are agents of the Seller. Buyer and or Bidder agrees to hold harmless and indemnify Lawson Co. Auctioneers, LLC and its Agents and its Representatives from any and all claims, damages or suits including but not limited to awards, judgments, costs, fees, etc. Lawson Co. Auctioneers, LLC., reserves the right to alter this agreement at any time. This will take place by updating this site. Please check back and review these terms as every time you use this site you are agreeing to the terms as they are written at that time. Auction company employees and/or auction company may bid on and purchase auction items. BIDDER DEFAULT: Failure to complete a purchase is illegal and will result in one or more of the following (1) prosecution (2) loss of bidding privileges for Lawson Co. Auctioneers, LLC. and all other Marknet auctions. By accepting the terms, I agree to receive emails and text messages (Msg & Data rates may apply) about current and upcoming auctions.  If a bidder at any time feels his/her username, password or bidder number has been compromised due to lack of security by the bidder, notify Auctioneer immediately. For additional information, contact Lawson Co. Auctioneers, LLC. at 1-502-718-0990 TIME IS OF THE ESSENCE in regard to all auction terms. 

**Location Notice: In the past, we have had GPS sending bidders to the wrong location when entering our address in - 8963 Bellwood Road, Bardstown, Ky 40004. Please note that we are located near Boston, Kentucky. This is NOT the location near Bloomfield, KY—please verify directions before travel. Pickup/Payment Info: Two pickup days: May 29th and May 30th 9:00 AM - 6:00 PM. Accepted methods of payment are cash, cashier's check or personal/business check, credit/debit card (with a 3.5% processing fee). Credit and debit card payments are accepted up to a maximum of $2,500 per invoice. Any balance exceeding $2,500 must be paid by an approved alternative payment method, including cash, check, cashier’s check, wire transfer, or other form acceptable to the auction company. The auction company reserves the right to require payment by certified funds at its sole discretion. There is a $50 transfer fee on all Titles. Pickup for all Titled Vehicles will be Monday, June 1. from 9:00 AM - 4:00 PM.  Pick up for shipping containers:  Please make arrangements with the auctioneer. All purchases that have not been paid for or payment/pickup arrangements are not made by 05/30/2026 your account will be automatically charged to the credit card used at registration, with a 3.5% processing fee. All purchased items must be removed by the deadline of 05/30/2026 unless arrangements have been made. Any items not removed by the deadline will, at the Auctioneer's discretion, be discarded or resold with proceeds retained by Auctioneer. There will be NO REFUND to the purchaser for these forfeited items. All buyers are required to schedule a designated pickup time slot in advance to help ensure an efficient loading process and minimize wait times. Buyers who arrive without an appointment may experience delays or be asked to return at another time. To schedule an appointment: In the upper right-hand corner of the invoice, next to the print & pay buttons, there will be a button that says, “Schedule your pickup appointment”. Once you click that button and you will be able to select from available appointments. Buyers are responsible for bringing their own appropriate vehicles, trailers, tie-downs, straps, and any necessary equipment to safely transport their purchases. While staff will be available to assist with loading, buyers must be physically able and prepared to help move, lift, and secure their items. Buyers should also bring additional help if needed. All items become the buyer’s responsibility once they are removed from the premises.

How Group Extended Bidding Works In our equipment auctions, every item is placed in a group with similar or like items. When any item in a group gets a bid in the final moments, every item in that group extends together — and they all close at the exact same time. Why this matters for you: • You won’t miss out on a similar item that might be going for less • You have time to switch your bid to a comparable lot if one gets too high • All like items close together, so you can bid with a full picture How to see what’s grouped together: Click the linked icon on any lot to see every item in that group. This format gives you more flexibility and a fair shot at the item that fits your budget. Your local auctioneer with a national reach.

2023 Ford F-450 Super Duty Limited Crew Cab 4x4 Dually – Serial #0147 – 12,000 Miles A rare, numbered, factory-serialized example of Ford's flagship Super Duty. This truck wears the factory Limited console plaque stamped #0147 — one of an estimated 300–500 F-450 Limited units produced for the 2023 model year. The Limited trim is the highest-priced and lowest-volume Super Duty Ford has ever built, and serialized examples like this one are increasingly sought-after by collectors and enthusiasts. Powered by the High Output 6.7L Power Stroke V8 Turbo Diesel — 500 HP and 1,200 lb-ft of torque — paired with the 10-speed TorqShift automatic and 4WD. Build date August 2023. Original MSRP exceeded $110,000 when new. With only 12,000 actual miles, this is as close to new as a 2023 Super Duty can be. Numbered & Documented Factory-serialized #0147 Limited console plaque VIN: 1FT8W4DM9PED70687 Built August 2023, Kentucky Truck Plant Estimated 300–500 F-450 Limited units produced for 2023 Powertrain & Capability 6.7L High Output Power Stroke V8 Turbo Diesel – 500 HP / 1,200 lb-ft torque 10-speed TorqShift automatic transmission 4WD with electronic shift-on-the-fly Dual rear wheels (dually) 14,000 lb GVWR Up to 40,000 lb gooseneck / 35,000 lb fifth wheel / 30,000 lb conventional tow rating ~6,200 lb payload capacity 19.5" forged aluminum wheels with 225/70R19.5G tires Configuration Crew Cab, 176" wheelbase 8-ft cargo bed Exterior: Agate Black Limited Trim — Loaded with Premium Features Two-tone leather seating, heated, cooled, and massaging front seats Heated rear seats and heated steering wheel Twin-panel panoramic moonroof 18-speaker B&O premium sound system 12-inch LCD digital instrument cluster and 12-inch SYNC 4 touchscreen Wireless charging pad and 5G Wi-Fi hotspot capability 360-degree camera system with split-view display Adaptive cruise control with stop-and-go Pro Trailer Backup Assist and Trailer Reverse Guidance Lane-keeping system and pre-collision assist with automatic emergency braking Power-deployable running boards PowerScope power-telescoping trailer tow mirrors with memory and heat LED headlights, fog lamps, and cargo box lighting Speed-sensitive adaptive steering Remote-release tailgate Suede headliner Bid with Confidence. Whether you want a workhorse capable of pulling 40,000 lbs or a low-mile collector-grade Super Duty, opportunities to own a numbered F-450 Limited at auction are uncommon.

This 2024 Takeuchi TL12V-2 is a clean enclosed cab compact track loader showing only 280 hours. It comes equipped with a tooth bucket and vertical lift loader arms, making it a strong machine for loading, grading, dirt work, cleanup, and general jobsite use. The TL12V-2 is one of Takeuchi’s larger track loaders, with the weight, horsepower, and hydraulic capacity needed for heavier work. The cab is clean and well laid out with joystick controls, digital display, heat, A/C, radio, backup camera display, and good visibility around the machine. It also has rubber tracks, a rear guard/bumper setup, and a rear-mounted winch. A very nice low-hour Takeuchi track loader with enclosed cab comfort and a bucket ready to go to work. Features: Enclosed cab Heat and A/C Joystick controls Digital display Backup camera Radio Tooth bucket Rubber tracks Vertical lift loader arms Rear guard/bumper with winch 280 hours showing Specifications: Make: Takeuchi Model: TL12V-2 Serial Number: 412007745 Engine Power: 109.7 hp Operating Weight: 13,190 lbs Rated Operating Capacity: 4,107 lbs Tipping Load: 11,737 lbs Bucket Breakout Force: 7,874 lbs Lift Arm Breakout Force: 7,109 lbs Standard Auxiliary Hydraulic Flow: 23.2 gpm Optional High Flow: 40.4 gpm Hydraulic Pressure: 3,481 psi Travel Speed: 7.3 mph high range Condition: Clean low-hour machine with 280 hours showing. Cab is clean with joystick controls, digital display, seat, floor area, and interior panels all in nice shape. Exterior is clean with normal light use showing on the bucket, tracks, loader arms, and rear guard. Nice enclosed cab Takeuchi track loader with bucket, diesel power, and low hours.

Up for auction is a 2006 Dodge Charger SRT8 with just 39,000 actual miles — exceptionally low for a 20-year-old performance car. Powered by the legendary 6.1L HEMI V8 producing 425 horsepower and 420 lb-ft of torque, paired with a 5-speed automatic transmission and rear-wheel drive. Built at the Brampton, Ontario assembly plant in January 2006. Title: This vehicle carries a REBUILT TITLE. SRT8 Features Include: • 6.1L HEMI V8 — 425 HP, 420 lb-ft torque • 5-speed automatic transmission • Sport-tuned suspension and Brembo performance brakes • 180 MPH speedometer / 8,000 RPM tachometer • SRT8 performance gauge cluster • Leather-wrapped, red-stitched steering wheel with audio and cruise controls • Power windows, locks, mirrors, and seats • Premium audio system • Aggressive SRT8 styling — hood scoop, body kit, 20” forged wheels A clean, low-mileage SRT8 like this is getting harder to find.

1967 Ford LTD 4-Door — All Original Classic Collector Car — 64,924 Original Miles VIN: 7E64C218942 Up for auction is a stunning 1967 Ford LTD showing just 64,924 original miles — a true survivor and an outstanding example of American luxury motoring from the golden era of Detroit. This LTD has been remarkably well-preserved and presents as an all-original classic collector car, making it a rare find for the discerning collector. Factory Build Details (per door data plate): • Model Year: 1967 • Assembly Plant: Mahwah, New Jersey • Body Style: LTD 4-Door Hardtop • Exterior Color: Dark Moss Green Metallic (Code Y) • Interior Trim: Green (Code 9G) • Build Date: April 28, 1967 • District Sales Office: Chicago (DSO 13) • Rear Axle: 2.80:1 Conventional • Transmission: Cruise-O-Matic Automatic Highlights: • Beautiful original Dark Moss Green Metallic paint with deep shine and excellent chrome throughout • Stacked dual headlights with original LTD grille emblem — iconic late-60s Ford styling • Original interior featuring green cloth and vinyl bench seats in remarkable condition • Factory woodgrain dash with original gauges, radio, and full instrumentation (fuel, oil, temp, alternator) • Original steering wheel with crown-emblem horn button • Column-shift automatic transmission • Factory rubber floor mats still in place • Original Quaker State service record sticker still affixed under the hood. • Drives as it should — a smooth, quiet, comfortable cruiser built when Ford set the standard for full-size American luxury The LTD was Ford’s top-of-the-line full-size offering, marketed as quieter than a Rolls-Royce. With its low original mileage, well-documented history, original paint and interior, and matching factory build details, this car is a turnkey collector vehicle ready for cruise nights, car shows, or weekend Sunday drives. Cars in this original, unmolested condition are becoming nearly impossible to find.

Under CDL- 2003 Ford F-650 Single-Axle Flatbed Dump Truck — 5.9 Cummins Diesel — One Owner VIN: 3FDNF65G93MB09373 Up for auction is a clean, one-owner 2003 Ford F-650 single-axle flatbed dump truck — purchased new and worked its entire life by a local lumber store. Trucks that spend their service life hauling building materials for a lumber yard tend to be well cared for and see steady, predictable use rather than hard abuse — and this truck reflects that. Power comes from the legendary 5.9L Cummins diesel, one of the most respected and dependable medium-duty engines ever built — known for its longevity, simple design, strong torque, and easy, parts-friendly serviceability. It’s backed by a 7-speed transmission with PTO, which drives the hydraulic dump body. The 20-foot flatbed dump body makes this a versatile, capable truck for hauling and dumping lumber, building materials, mulch, gravel, dirt, equipment, and more. The flatbed design also allows easy side loading and unloading when a full dump isn’t needed. Highlights & Features: • 5.9L Cummins diesel engine • 7-speed transmission with PTO • 20-foot flatbed dump body with hydraulic dump • Single-axle configuration — easy to maneuver, license, and maintain compared to a tandem • Tilt steering • Air conditioning • Power windows • One-owner truck — purchased new by a local lumber store • The F-650 is one of the most popular medium-duty trucks on the road — versatile and parts-friendly The 5.9 Cummins and PTO-driven dump make this a dependable, ready-to-work addition to any farm, landscaping operation, lumber or building-materials business, or contractor fleet. One-owner trucks with documented, single-purpose service history are getting harder to find.

2012 Freightliner M2 112 Day Cab Tractor — Single Axle — Clean Title VIN: 1FUBC4DV0CDBE5590 Up for auction is a 2012 Freightliner Business Class M2 112 single-axle day cab tractor — a versatile, dependable truck well suited for local and regional hauling, yard spotting, farm use, equipment moving, or general commercial fleet work. Mileage: 306,436 miles Title: Clean Kentucky title in hand — no brands, no liens. (Previously titled out of state, Arizona.) Specifications (per title and door data plate): • Year/Make/Model: 2012 Freightliner M2 112 • Body Type: Day Cab Tractor • Engine: 6-cylinder Detroit Diesel • Configuration: Single rear axle (4×2) • Front Axle Rating (GAWR): 12,000 lb • Rear Axle Rating (GAWR): 20,000 lb • Tires: 295/75R22.5 • Rims: 22.5” × 8.25” • Color: White • Built: Freightliner, Mexico Highlights: • Day cab configuration — easy in-and-out, great visibility, ideal for local hauling, drop-and-hook, and shorter runs where a sleeper isn’t needed • The M2 112 is the heavier-duty version of the M2 platform, with a longer hood spec’d for larger displacement engines and serious vocational work • One of the most popular and proven medium/heavy-duty truck platforms on the road — known for maneuverability and easy serviceability • Single-axle setup keeps registration, fuel, and maintenance costs down compared to a tandem • Strong 20,000 lb rear axle rating for solid payload capability • Clean title — no liens, no brands — ready to title and register • Parts and service support widely available nationwide The M2 112 day cab is built to work and built to last. This is a strong opportunity to add a capable, clean-title Freightliner tractor to your operation 

25+5’ Gooseneck Flatbed Trailer – PJ Trailers LD This PJ Trailers LD gooseneck flatbed trailer is a heavy-duty deckover style trailer with tandem dual axles and a wood deck. It has the long open flatbed layout that works well for hauling equipment, attachments, hay, building materials, vehicles, and other large loads. The gooseneck setup gives it a stable pull, and the trailer is equipped with dual landing jacks up front. The trailer has a black painted frame, rub rail with stake pockets along the sides, rear ramps, safety chains, lighting, and Dexter axle/suspension components. This is a good heavy-capacity trailer for farm, construction, equipment, or commercial use. Features: 25+5’ deck length Gooseneck hitch Tandem dual axles Wood deck Deckover flatbed design Dual landing jacks Rub rail and stake pockets Rear loading ramps Safety chains Dexter axle/suspension components Specifications: Make: PJ Trailers Model: LD Year: 2022 VIN: 5SF3926200637 GVWR: 25,000 lbs GAWR: 10,000 lbs per axle Tire size: 235/80R16 E Rim size: 16x6K Trailer type: Gooseneck Condition: Very nice trailer with a clean frame, good wood deck, and tandem dual axle setup. Deck boards, side rails, gooseneck, landing jacks, and rear ramp area are all in good condition with normal light use showing. Clean heavy-duty gooseneck flatbed trailer ready for equipment, farm, or commercial hauling.

2013 Polaris Ranger 800 Midsize UTV — Low Miles — Loaded with Extras Up for auction is a sharp 2013 Polaris Ranger 800 Midsize side-by-side — a versatile, dependable UTV ready for farm work, hunting, trail riding, or property chores. This one shows low use and comes well equipped with quality add-ons. Mileage: 1,873 miles Specifications: • Year/Make/Model: 2013 Polaris Ranger 800 Midsize • Engine: 800 HO twin-cylinder • Drive: On-demand True All-Wheel Drive / 2WD • Seating: 2-passenger bench seat • Cargo Bed: Steel dump box • Owner’s manual: Included Extras & Upgrades: • Front winch — ready for pulling and recovery • Heavy-duty front brush guard / bumper • Full overhead roof • Front windshield • Mirrors • Overhead stereo / speaker system • Aftermarket alloy wheels with aggressive tires • Custom orange-and-silver hood graphics Highlights: • The Ranger 800 Midsize is one of Polaris’s most popular utility models — compact enough to fit in a truck bed or through gates, but with the power and capability to work hard • Smooth-riding independent suspension front and rear • Dump-style cargo bed for hauling feed, tools, firewood, and gear • Low miles for the year — plenty of life left • Comes loaded with the extras buyers want, already installed A clean, well-optioned Ranger like this is hard to beat for the money. Whether for the farm, the deer lease, or general property use, this side-by-side is ready to go to work.

2011 Ford F-250 XLT Gas Super Duty Crew Cab — 4x4 — Long Bed. 6.2L V8 gas engine (2-valve SOHC, 385 hp) VIN: 1FT7W2B67BEB00144 Up for auction is a 2011 Ford F-250 XLT Super Duty crew cab 4x4 — a hard-working three-quarter-ton truck built to tow, haul, and handle the toughest jobs on the farm or job site. Mileage: 314,000 miles Specifications (per door data plate): • Year/Make/Model: 2011 Ford F-250 Super Duty XLT • Cab: Crew Cab • Bed: Long Bed • Drive: 4x4 • Wheelbase: 172” • GVWR: 9,800 lb • Front Axle Rating: 5,200 lb • Rear Axle Rating: 6,100 lb • Tires: LT245/75R17E on 17” × 7.5” rims • Exterior: White • Build Date: August 2010 Highlights: • Crew cab seating — full room for the crew or the family • Long bed for maximum hauling capability • 4x4 — ready for mud, snow, fields, and rough ground • Heavy-duty front brush guard / grille guard already installed • Hood deflector and running boards • The Super Duty is one of the most capable and dependable work trucks ever built — proven, parts-friendly, and easy to service • A strong candidate for a work truck, farm truck, or tow rig

1989 Ford Thunderbird Coupe — 44,566 Original Miles — Survivor VIN: 1FAPP6048KH179558 Up for auction is a remarkably well-preserved 1989 Ford Thunderbird showing just 44,566 original miles — a genuine low-mileage survivor from the first year of Ford’s acclaimed redesigned Thunderbird. Factory Build Details (per door data plate): • Year/Make/Model: 1989 Ford Thunderbird Coupe • Body Style: 2-Door Coupe (Body Code 63D) • Engine: 3.8L V6 • Build Date: April 1989 • GVWR: 4,885 lb • Assembled: USA Highlights: • Just 44,566 original miles — exceptionally low for the year • 1989 marked the debut of the all-new tenth-generation Thunderbird — a complete ground-up redesign with a longer wheelbase, four-wheel independent suspension, and a smooth, modern ride that earned strong praise in its day • Sharp, aerodynamic styling that still turns heads • Comfortable, well-appointed coupe built for relaxed highway cruising • A clean, low-mileage example that has clearly been cared for Low-mileage, well-kept Thunderbirds from this generation are getting harder to find every year. This is a great opportunity for a collector, a weekend cruiser, or anyone who appreciates a clean, original American coupe.

ATTENTION CAMPER BUYERS — THIS IS THE ONE TO WATCH! This is a 2024 Jayco Jay Flight SLX 261BHS bunkhouse travel trailer with only 1 owner and only 2 trips of reported use. A late-model camper like this with such light use is exactly what buyers are looking for.LIKE NEW STYLE CAMPER WITHOUT THE NEW CAMPER PRICE TAG! The Jay Flight SLX 261BHS is a highly desirable family floorplan with rear bunks, front queen sleeping area, slide-out, dinette, sofa, kitchen, full bathroom, power awning, and 2 added TVs. It is set up right for family camping, lake weekends, road trips, hunting camp, or extra guest space.BIG FAMILY LAYOUT — EASY TO PULL — READY FOR SUMMER! This camper gives you plenty of sleeping room and living space without being oversized. The bunkhouse layout is one of the most popular setups on the market, and this one has the right look, the right year, the right usage history, and the bonus of 2 added TVs already installed.KEPT IN A CAMPER STORAGE FACILITY! This unit has been stored properly and is ready to go for the next owner. With only 2 trips of use, 1-owner history, and a clean late-model setup, this camper should draw serious attention.Features:1-owner camperOnly used for 2 tripsKept in a camper storage facilityReady to go2 added TVs2024 model yearBunkhouse floorplanSlide-outFront queen bed areaRear bunk bedsDinette and sofa seatingKitchen with appliancesFull bathroomPower awningTandem axle bumper-pull camperSpecifications:Year: 2024Make: JaycoModel: Jay Flight SLX 261BHSLength: 30' 4"Width: 8'Height with A/C: 11' 1"Dry hitch weight: 685 lbsUnloaded vehicle weight: 5,825 lbsGVWR: 7,500 lbsFresh water: 52 galGray water: 39 galBlack water: 39 galCondition:Very clean, late-model, 1-owner camper with only 2 trips of reported use. This unit has been kept in a camper storage facility, includes 2 added TVs, and is ready to go for camping season.

2013 Ford F-150 XL Regular Cab — 3.7L V6 — Runs & Drives VIN: 1FTMF1CM2DKD38238 Motor has a tick.  Mileage: 186,608 miles Specifications (per door data plate): • Year/Make/Model: 2013 Ford F-150 • Cab: Regular Cab • Engine: 3.7L V6 • Wheelbase: 145” • GVWR: 6,750 lb • Front Axle Rating: 3,150 lb • Rear Axle Rating: 3,800 lb • Tires: P235/75R17 on 17” × 7.5” rims • Exterior: White • Build Date: October 2012 Condition  • Runs and drives. The truck is operational and moves under its own power. • The motor has a tick. Buyers should be aware of an engine tick and are strongly encouraged to inspect and listen before bidding.  Highlights: • The F-150 is the best-selling truck in America — proven, parts-friendly, and easy to service • Regular cab configuration — simple, tough, and ideal for work use • 3.7L V6 — good fuel economy for a full-size truck • Strong candidate for a work truck, farm truck, or project Inspection strongly encouraged — please inspect and listen to the engine before bidding. Sold AS-IS, WHERE-IS with no warranties expressed or implied. All sales final at the fall of the hammer.

Sharp, clean-looking day cab with the setup buyers want. This 2013 International ProStar+ 122 is powered by a MaxxForce 13 diesel engine paired with the desirable Eaton Fuller 10-speed manual transmission. It has the right stance, the right look, and the kind of road presence that stands out in the lineup.Showing 738,485 miles, but don’t let the miles tell the whole story — this truck presents well and has the kind of setup buyers are after. Tandem axle configuration, dual fuel tanks, high-rise roof fairing, good tread showing, and a clean gray interior make this a strong candidate for hauling, farm use, regional freight, flatbed work, hopper duty, equipment hauling, or fleet use.Features:• MaxxForce 13 diesel engine• Eaton Fuller 10-speed manual transmission• Tandem axle day cab setup• 738,485 miles showing• Dual fuel tanks• High-rise roof fairing• Fifth wheel plate• Air ride suspension• Good tread showing on rear tires• Clean gray interior• International ProStar+ 122Specifications:Year: 2013Make: InternationalModel: ProStar+ 122VIN: 1HSDJAPR1EH051161Engine: MaxxForce 13 dieselTransmission: Eaton Fuller 10-speed manualGVWR: 47,500 lbsCondition:High-mileage commercial truck with normal wear from use, including cosmetic wear, paint wear, interior wear, and surface rust in areas. Overall, this truck has a strong look, clean cab, desirable 10-speed setup, and the kind of presence buyers notice. View photos for overall condition and any visible wear or imperfections.

Compact, capable, and easy to maneuver, this 2026 CFG Industrial YNT18 mini excavator is designed for trenching, landscaping, property maintenance, and light construction work. Its compact footprint makes it ideal for working in tight spaces while still delivering dependable digging and lifting performance. Equipped with a Yanmar-based 3-cylinder diesel engine and smooth hydraulic controls, this machine is well suited for homeowners, contractors, farms, and ranch applications.Features3-cylinder diesel engineElectric startRubber tracksFront dozer bladeHydraulic boom and bucket controlsAuxiliary hydraulicsSpecificationsModel: YNT18Engine Type: 3-cylinder liquid-cooled dieselEngine Family: Yanmar TNV SeriesOperating Weight: Approx. 2,200 lb classFuel Type: Diesel

This FAE forestry mulcher is a heavy-duty skid steer attachment built for clearing brush, saplings, overgrowth, fence lines, trails, and rough property cleanup. It has a wide mulching head, protective front guard, heavy rotor with cutting teeth, and hydraulic drive setup for use with high-flow skid steers.FAE mulchers are well-known attachments in the land clearing and forestry world, and this one has a strong, professional build with a clean frame and visible use on the rotor/teeth area. Good attachment for contractors, farms, landowners, hunting property work, right-of-way cleanup, and general vegetation management.Features:Skid steer forestry mulcherHydraulic driveFront protective guardHeavy rotor with cutting teethSkid steer quick attach style mountHigh-flow hydraulic setupHeavy-duty steel housingMade in ItalySpecifications:Make: FAEModel: BL4/SSL-175 VTSerial Number: 23-03024Type: MulcherNet Weight: 3,075 lbsMax Hydraulic Flow: 48 gpmMax Hydraulic Pressure: 5,076 psiAttachment style: Skid steer quick attachCondition:Good forestry mulcher attachment with normal use showing on the rotor, teeth, and working edges. Frame, guard, housing, and mount are solid and clean. Teeth show use from mulching material but are still installed across the rotor. Good heavy-duty FAE mulcher for brush clearing, land cleanup, and skid steer forestry work.

This 72” ES skid steer brush cutter is built for cutting brush, weeds, small saplings, overgrowth, trails, fence lines, and rough property cleanup. It has a universal skid steer hookup, hydraulic drive, heavy front push bar, and a wide cutting deck for covering ground quickly.Good attachment for farm use, land clearing, hunting property maintenance, driveway edges, field cleanup, and general skid steer work. The 72” size makes it a handy cutter for larger areas while still being manageable on a skid steer or compact track loader.Features:72” cutting widthUniversal skid steer hookupHydraulic brush cutterFront push barHeavy-duty deckHydraulic hoses includedProtective top coverBuilt for brush, grass, weeds, and light clearing workSpecifications:Make: ESModel: ESBDEBBCSize: 72”Serial Number: 425182Weight: 1,336 lbsMax PSI: 3,200Hookup: UniversalMax Flow: 250CCDate: 2/12/2024Condition:Good brush cutter attachment with light use showing on the deck and working areas. Frame, mount, push bar, hoses, and deck are in good condition. Clean attachment overall and ready for brush cutting, trail work, field edges, and property cleanup.

2023 Kawasaki KLX 140R L dirt bike with the green Kawasaki plastics and 140R L graphics. This is a nice size trail bike that would be great for youth riders moving up, smaller adult riders, farm use, trail riding, practice riding, or weekend fun around the property.Features:2023 Kawasaki dirt bikeKLX 140R L model140cc class trail bikeGreen Kawasaki plasticsAcerbis hand guardsFront and rear knobby tiresSide standManual clutch setupGood size for youth riders, smaller adults, trails, farm use, or practice ridingCondition:Bike appears clean overall with normal signs of use. Plastics and graphics show some light scuffs from riding/handling. Nice trail-size Kawasaki dirt bike ready for the next rider.

Compact, capable, and easy to maneuver, this 2026 CFG Industrial YNT18 mini excavator is designed for trenching, landscaping, property maintenance, and light construction work. Its compact footprint makes it ideal for working in tight spaces while still delivering dependable digging and lifting performance. Equipped with a Yanmar-based 3-cylinder diesel engine and smooth hydraulic controls, this machine is well suited for homeowners, contractors, farms, and ranch applications.Features3-cylinder diesel engineElectric startRubber tracksFront dozer bladeHydraulic boom and bucket controlsAuxiliary hydraulicsSpecificationsModel: YNT18Engine Type: 3-cylinder liquid-cooled dieselEngine Family: Yanmar TNV SeriesOperating Weight: Approx. 2,200 lb classFuel Type: Diesel

4 door shipping container - CIMU0886220

4 Door Shipping Container - YLEU254762

2 door shipping container - ztcu4520634

2 door shipping container

Take on trenching, landscaping, property maintenance, and light construction work with this compact and capable 2026 ATS Power ATS-ME18 mini excavator. Built with a durable open-station design and easy-to-transport footprint, this machine is powered by a dependable 420cc single-cylinder gas engine and offers smooth hydraulic operation for a variety of digging and material-moving tasks. Its compact size makes it ideal for tight-access jobs while still delivering solid breakout performance and lifting capability.Features420cc EPA-compliant gasoline engineElectric startRubber tracksFront dozer bladeAuxiliary hydraulicsHydraulic boom and bucket controlsSpecificationsModel: ATS-ME18Year: 2026Engine Manufacturer: Chongqing Zongshen General Power Machine Co., Ltd.Engine Displacement: 420ccHorsepower: 11.4 HPOperating Weight: Approx. 2,200 lbsBucket Capacity: 1.06 cu. ft.Fuel Type: Gasoline

Take on trenching, landscaping, property maintenance, and light construction work with this compact and capable 2026 ATS Power ATS-ME18 mini excavator. Built with a durable open-station design and easy-to-transport footprint, this machine is powered by a dependable 420cc single-cylinder gas engine and offers smooth hydraulic operation for a variety of digging and material-moving tasks. Its compact size makes it ideal for tight-access jobs while still delivering solid breakout performance and lifting capability.Features420cc EPA-compliant gasoline engineElectric startRubber tracksFront dozer bladeAuxiliary hydraulicsHydraulic boom and bucket controlsSpecificationsModel: ATS-ME18Year: 2026Engine Manufacturer: Chongqing Zongshen General Power Machine Co., Ltd.Engine Displacement: 420ccHorsepower: 11.4 HPOperating Weight: Approx. 2,200 lbsBucket Capacity: 1.06 cu. ft.Fuel Type: Gasoline

Kubota RTV1140 CPX 4x4 Diesel Utility Vehicle Four-passenger Kubota RTV1140 CPX with hydraulic dump bed. Diesel-powered, four-wheel drive, hydrostatic transmission (VHT), and factory power steering. Trans-Cab style rear seating that folds to expand cargo space. ROPS frame, front brush guard, and rear receiver hitch. Features: Kubota diesel engine 4WD with differential lock Variable Hydro Transmission (VHT) Power steering Hydraulic dump cargo bed 4-passenger Trans-Cab seating ROPS frame Front brush guard Rear receiver hitch Condition: Used working unit. Paint is faded with peeling and wear, especially on the cargo bed. Bed floor shows rust with wear-through in one area. Driver-side bench seat has torn upholstery (currently taped). Some rust on cab floor and cracking on rear plastic fender.

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Nice size for working around barns, driveways, yards, and tighter jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeWork light mounted on boomGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: H15RR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 2,030 lbsRubber tracksFront blade

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Nice size for working around barns, driveways, yards, and tighter jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeWork light mounted on boomGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: H15RR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 2,030 lbsRubber tracksFront blade

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Nice size for working around barns, driveways, yards, and tighter jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeWork light mounted on boomGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: H15RR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 2,030 lbsRubber tracksFront blade

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Nice size for working around barns, driveways, yards, and tighter jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeWork light mounted on boomGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: H15RR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 2,030 lbsRubber tracksFront blade

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy machine for working around barns, driveways, yards, and tighter jobsites while still offering solid hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeWork light mounted on boomGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: QK16RR420 gas engineApprox. 15 HP engine ratingApprox. 25.6 cu. in. engine displacementHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 2,030 lbsRubber tracksFront blade

Compact tracked mini excavator designed for trenching, landscaping, drainage work, grading, and light construction applications. Features a simple open-station design with hydraulic controls and a compact footprint for working in tighter areas around homes, farms, and jobsites.Features:Compact tracked mini excavatorOpen operator station with canopyHydraulic boom, stick, and bucket controlsFront backfill bladeRubber track undercarriageBoom-mounted work lightCompact size for tight access work areasSpecifications:Model: ATS-RT15RZongshen single-cylinder gas engine419cc engine displacementApprox. 11.4 HPHydrostatic drive systemOperating weight: approx. 2,200 lbsRated capacity: approx. 1,058 lbsRubber tracksFront blade

Compact tracked mini excavator designed for trenching, landscaping, drainage work, grading, and light construction applications. Features a simple open-station design with hydraulic controls and a compact footprint for working in tighter areas around homes, farms, and jobsites.Features:Compact tracked mini excavatorOpen operator station with canopyHydraulic boom, stick, and bucket controlsFront backfill bladeRubber track undercarriageBoom-mounted work lightCompact size for tight access work areasSpecifications:Model: ATS-RT15RZongshen single-cylinder gas engine419cc engine displacementApprox. 11.4 HPHydrostatic drive systemOperating weight: approx. 2,200 lbsRated capacity: approx. 1,058 lbsRubber tracksFront blade

Compact, powerful, and easy to maneuver, this 2026 ATS-T460 mini track skid steer loader is designed for landscaping, construction, property maintenance, and material handling applications. Powered by a 23 HP Zonsen gasoline engine, this stand-on unit features joystick controls, auxiliary hydraulics, rubber tracks, and a large front bucket for efficient loading and grading work in tight-access areas.Features:23 HP Zonsen gasoline engine679cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designQuick-connect hydraulic couplersFront work lightsSpecifications:Model: ATS-T460Year: 2026Operating weight: 1,653 lbsBucket capacity: 5.3 cu ft

Compact, powerful, and easy to maneuver, this 2026 ATS-T460 mini track skid steer loader is designed for landscaping, construction, property maintenance, and material handling applications. Powered by a 23 HP Zonsen gasoline engine, this stand-on unit features joystick controls, auxiliary hydraulics, rubber tracks, and a large front bucket for efficient loading and grading work in tight-access areas.Features:23 HP Zonsen gasoline engine679cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designQuick-connect hydraulic couplersFront work lightsSpecifications:Model: ATS-T460Year: 2026Operating weight: 1,653 lbsBucket capacity: 5.3 cu ft

Compact, powerful, and easy to maneuver, this 2026 ATS-T460 mini track skid steer loader is designed for landscaping, construction, property maintenance, and material handling applications. Powered by a 23 HP Zonsen gasoline engine, this stand-on unit features joystick controls, auxiliary hydraulics, rubber tracks, and a large front bucket for efficient loading and grading work in tight-access areas.Features:23 HP Zonsen gasoline engine679cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designQuick-connect hydraulic couplersFront work lightsSpecifications:Model: ATS-T460Year: 2026Operating weight: 1,653 lbsBucket capacity: 5.3 cu ft

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy size for working around barns, driveways, yards, and tight jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: MH12RXR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 1,760 lbsRubber tracksFront bladeProduction year: 2026

Compact, powerful, and easy to maneuver, this 2026 ATS-T460 mini track skid steer loader is designed for landscaping, construction, property maintenance, and material handling applications. Powered by a 23 HP Zonsen gasoline engine, this stand-on unit features joystick controls, auxiliary hydraulics, rubber tracks, and a large front bucket for efficient loading and grading work in tight-access areas.This unit has a damaged control handle as pictured, sold as is.Features:23 HP Zonsen gasoline engine679cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designQuick-connect hydraulic couplersFront work lightsSpecifications:Model: ATS-T460Year: 2026Operating weight: 1,653 lbsBucket capacity: 5.3 cu ft

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy size for working around barns, driveways, yards, and tight jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: MH12RXR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 1,760 lbsRubber tracksFront bladeProduction year: 2026

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy size for working around barns, driveways, yards, and tight jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: MH12RXR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 1,760 lbsRubber tracksFront blade

Compact and easy to maneuver, this 2026 Landhonor LHR-ME380X2 mini skid steer loader is built for landscaping, property maintenance, material handling, and light construction work. Powered by a Rato gasoline engine, this unit features a compact stand-on design with joystick controls, rubber tracks, auxiliary hydraulics, and front bucket attachment. Its narrow footprint allows access through gates, tight job sites, and confined work areas while still delivering strong lifting and loading capability.Features:Rato gasoline engine739cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designFront work lightsProtective operator canopySpecifications:Model: LHR-ME380X2Operating weight: 1,510 lbsBucket capacity: 5.3 cu ftMax power: 20 HP

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy size for working around barns, driveways, yards, and tight jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationFront backfill bladeGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: MH12RXR420 gas engineApprox. 15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 1,760 lbsRubber tracksFront bladeProduction year: 2026

Brand new SSL580 ride-on skid steer loader with rubber tracks, ride-on operator platform, front bucket, and canopy top. Compact size with strong lifting and maneuverability makes this machine a great fit for landscaping, dirt work, grading, property maintenance, cleanup, trenching support, material handling, farm work, and tight-access job sites.This unit features joystick controls, auxiliary hydraulics, compact track design, and an open operator station with overhead canopy. Sharp-looking machine with the aggressive red finish and compact footprint buyers are after.Features:• Brand new unit• SSL580 ride-on skid steer loader• Rubber track machine• Front bucket attachment• Auxiliary hydraulics• Ride-on operator platform• Overhead canopy• Joystick controls• Compact machine for tight-access work• Great for landscaping, grading, cleanup, property maintenance, and construction useSpecifications:• Model: SSL580• Serial No.: 2512350451• Production Year: 2026• Operating Weight: 606 kg• Shipping Dimensions: 2640 x 1024 x 1987 mm• EPA gasoline engine• Compact track loader configuration

Compact and easy to maneuver, this 2026 Landhonor LHR-ME380X2 mini skid steer loader is built for landscaping, property maintenance, material handling, and light construction work. Powered by a Rato gasoline engine, this unit features a compact stand-on design with joystick controls, rubber tracks, auxiliary hydraulics, and front bucket attachment. Its narrow footprint allows access through gates, tight job sites, and confined work areas while still delivering strong lifting and loading capability.Features:Rato gasoline engine739cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designFront work lightsProtective operator canopySpecifications:Model: LHR-ME380X2Operating weight: 1,510 lbsBucket capacity: 5.3 cu ftMax power: 20 HP

Compact and easy to maneuver, this 2026 Landhonor LHR-ME380X2 mini skid steer loader is built for landscaping, property maintenance, material handling, and light construction work. Powered by a Rato gasoline engine, this unit features a compact stand-on design with joystick controls, rubber tracks, auxiliary hydraulics, and front bucket attachment. Its narrow footprint allows access through gates, tight job sites, and confined work areas while still delivering strong lifting and loading capability.Features:Rato gasoline engine739cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designFront work lightsProtective operator canopySpecifications:Model: LHR-ME380X2Operating weight: 1,510 lbsBucket capacity: 5.3 cu ftMax power: 20 HP

Compact and easy to maneuver, this 2026 Landhonor LHR-ME380X2 mini skid steer loader is built for landscaping, property maintenance, material handling, and light construction work. Powered by a Rato gasoline engine, this unit features a compact stand-on design with joystick controls, rubber tracks, auxiliary hydraulics, and front bucket attachment. Its narrow footprint allows access through gates, tight job sites, and confined work areas while still delivering strong lifting and loading capability.Features:Rato gasoline engine739cc engine displacementStand-on operator platformJoystick controlsRubber tracksAuxiliary hydraulicsFront bucket attachmentCompact narrow-body designFront work lightsProtective operator canopySpecifications:Model: LHR-ME380X2Operating weight: 1,510 lbsBucket capacity: 5.3 cu ftMax power: 20 HP

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy size for working around barns, driveways, yards, and tighter jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationBackfill bladeGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: H12RR420 gas engineApprox. 13.5–15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 1,760 lbs36 in. backfill blade31 in. stick15 in. bucket7 in. rubber tracks

Compact tracked mini excavator built for digging, trenching, grading, drainage work, landscaping, and light construction jobs. Handy size for working around barns, driveways, yards, and tighter jobsites while still offering hydraulic digging power and a gas engine setup.Features:Compact tracked mini excavatorOpen operator station with canopyRubber track undercarriageHydraulic boom, stick, and bucket operationBackfill bladeGreat for trenching, drainage work, grading, and landscapingSpecifications:Model: H12RR420 gas engineApprox. 13.5–15 HP engine ratingHydrostatic driveReported hydraulic flow: approx. 5.7 GPMReported hydraulic pressure: approx. 2,320 PSIRated load capacity: approx. 1,760 lbs36 in. backfill blade31 in. stick15 in. bucket7 in. rubber tracks